Perle Systems - IOLAN DS1 A4D2
I/O-Geräteserver - 4x analoge Eingänge, 2x digitale I/O und 1x serieller DB9M-Port
Listenpreis:
914,00 €*
Händlerpreis - Jetzt anmelden
Lieferzeit: Derzeit ca. 3-4 Wochen
Preise für größere Stückzahlen bitte anfragen.
Tel.: +49 (0) 6201 845020 oder E-Mail: shop@sphinxcomputer.de
Tel.: +49 (0) 6201 845020 oder E-Mail: shop@sphinxcomputer.de
Herstellerartikelnummer:
04031050
Unsere Artikelnummer:
220606
Fragen? Wir beraten Sie gerne! → Kontaktformular
Produktinformationen "Perle Systems - IOLAN DS1 A4D2"
Die Ethernet-I/O- Technologie von Perle (IOLAN DS I/O Device Servers) ermöglicht den umfassenden Zugriff und die Steuerung von Remote-Digital-I/O, Analog-I/O, Puls-I/O, Relais und Temperatursensoren sowie Verbindungen von dezentralen seriellen Geräten an jedes IP-Netzwerk. Das IOLAN DS I/O kann Umgebungsalarme, Einbruchserkennung, Relaiskontaktschließungen und Geräteausfälle überwachen. Durch die Fernsteuerung des Bedieners oder der Anwendung kann das Öffnen und Schließen integrierter Relaiskontakte oder die Aktivierung digitaler Ausgangssignale in jede Reaktion auf ein kritisches Ereignis integriert werden.
LIEFERUMFANG: Perle Systems IOLAN DS1 A4D2
LIEFERUMFANG: Perle Systems IOLAN DS1 A4D2
Protokoll: | ModBus, RS 232 / 422 / 485 |
---|---|
Serienmäßige Anschlüsse: | 4 Anschlüsse |
Sicherheit: | Enhanced |
Stromversorgung: | Extern |
Verbindung: | 10 / 100-TX (RL45) |
Eigenschaften
- Fernzugriff und -steuerung von digitalen I/O und Relais
- Universal Digital I/O, Analogeingang, RTD/Thermoelement-Temperatursensoreingang & RS-232/422/485
- 10/100 Ethernet-Schnittstelle mit 1,5 kV Isolation (802.3 Standard)
- Klemmenblockanschlüsse für Strom und I/O
Technische Details
- Main Processor: MPC852T, 66 MHz, 87 MIPS
- I/O Processor: ATMEG48, 16 MIPS
- Network/Ethernet: 1 x 10/100Mb RJ45, 1.5 KV magnetic isolation
- I/O Connectors: Removable terminal blocks
- Digital I/O: 2 or 4 channels depending on model, software selectable as inputs or outputs, optical isolation of 2000V rms
- RAM MB: 16
- Flash MB: 4
- Dry Contact: Logic 0 = open. Logic 1= close to GND
- Wet Contact: Logic 0 = 0-3VDC, Logic 1= 10VDC-30VDC
- Open collector to 30VDC (source, sink or both), 200 mA max load, Digital out (DO) or pulse mode
- Form C type SPDT
- Contact rating: 1A@30VDC, 0.5A @AC: 120VAC
- Breakdown voltage: 500 VAC (50/60 Hz)
- Relay on time: 7 msec; Relay off time: 3 msec.
- Total switching time: 10 msec.
- Insulation resistance: 1000 MW minimum at 500 VDC
- Channels: 4 differential, 16-bit resolution
- Input range: ±150 mVDC, ±500 mVDC, ±1 VDC, ±5 VDC, ±10 VDC, 0-20 mA, 4-20 mA
- Optical Isolation: 3000 VDC
- Fault and overvoltage protection: up to ±35 V
- Sampling rate: 10 samples/sec.
- Input impedance: 20 M Ohm
- Accuracy: ±0.1% or better
- Zero drift: ±5 µV/° C
- Span drift: ±25 ppm/° C
- CMR @ 50/60 Hz: 90 dB min
- Types: J, K, T, E, R, S, B
- Isolation voltage: 2000 VDC
- Sampling rate: 10 samples/sec.
- Accuracy: ±0.15% or better
- Zero drift: ±5 µV/° C
- Span drift: ±25 ppm/° C
- CMR @ 50/60 Hz: 130 dB
- Channels: 4 differential inputs
- Input type: PT100, PT1000, Ni 518
- Optical Isolation: 2000 VDC
- Sampling rate: 10 samples/sec
- Accuracy: ±0.05% or better
- Zero drift: ±2.5 µV/° C
- Span drift: ±25 ppm/° C
- CMR @ 50/60 Hz: 130 dB
- IPV6, IPV4, TCP/IP, ARP, RARP, UDP, UDP Multicast, ICMP, BOOTP, DHCP, TFTP, Telnet, raw, reverse Telnet, MODBus/TCP, RCP, WINS, HTTP, SNMPV3
- Via Web browser, Perle DeviceManager software to manage single or multiple device servers, CLI – Telnet or shared console port, Menu, SNMP, MIB II, Perle MIB, read and write capabilities, SYSLOG, Easy Configuration Wizard
- Failsafe mode: Default outputs if loss of communication occurs, Set a personalized factory default for IOLANs
- Software selectable EIA/RS-232/422/485, DB9M connector, Full modem and hardware flow control on RS-232, 50bps to 230Kbps for EIA-232, Customizable baud rate support for unique speed requirements, up to 230Kbps for EIA-422/485, SUN Break Safe, Full bidirectional modem support, 15Kv ESD protection on all signals, EIA 232 full duplex, EIA 422 full duplex, EIA 485 4 wire, full duplex, EIA 485 2 wire, half duplex, with echo, EIA 485 2 wire, half duplex, without echo
- Power/Ready, Network Link activity
- Serial: Transmit and Receive data LEDs
- 9-30V DC on terminal blocks, Optional AC adapters available from Perle, p/n 04031154 (USA), 04031151 (UK), 04031152 (EU)
- Operating Temperature: 0°C to 55°C (32 F to 131 F)
- Storage Temperature: -40° C to 66° C (-40 F to 150 F)
- Chassis: Metal with an IP30 ingress protection rating
- Weight: 0.5 kg
- Dimensions: 12.7 x 9.2 x 4.5 (cm)